User's Manual

SECTION 4.2 21
4.2 Unlocking/Locking with Fingerprints
For the Lockly Guard Slide Edition
(228SL), use any finger to press the
OK Button or anywhere on the
touchscreen once the door is
closed to lock.
To lock the Lockly Guard Swing
Edition (228SW), you need to ma-
nually lift the handle once the
door is closed to lock.
Locking
Place a registered finger to the
fingerprint scanner located on the
exterior handle of the lock.
To register a fingerprint, please see
Section 3.6.
If your fingerprint is registered and
acknowledged, you will hear a
“beep” sound and a Green LED
will light up on the fingerprint scan-
ner.
You can then push down the
handle and open the door.
If you see a Red LED, it means your
fingerprint is not recognized. Try
again or use another registered
fingerprint.
For best fingerprint scanning prac-
tices, see Section 3.7.
Unlocking
OK Button