User's Manual

Google, Android, Google Play and Google Home are trademarks of Google LLC.

You will see a “10” on the screen, notifying the number of minutes that the keypad

is disabled for. After 10 minutes, you may attempt to enter the correct Access Code

to unlock the door. After the second incorrect attempt to unlock the lock with the

wrong Access Code, Lockly Guard will disable the keypad for 20 minutes, display-

ing a

“20” on the screen. After the third wrong attempt to unlock the door

with the

correct Access Code, the screen will be disabled for 30 minutes. (Exam-

ple A and Example B above).

Note: In order to conserve power, the countdown prompt will only be displayed

for 3 seconds. You can reactivate the screen by sliding your hand across the

screen.

4.6 Safe Mode

Countdown

Prompt

(Displayed in

Minutes)

Will start with 10

and countdown

until 0.

Example

Lockly Guard will enter Safe Mode when three (3) consecutive wrong Access

Codes are entered within 5 minutes. When in Safe Mode, the lock status icon

will start to flash.

To disable Safe Mode, you must unlock the door using the correct fingerprint or

enter the correct Access Code twice in a row. Activate the keypad by pressing

and holding for 3 seconds.

Once the screen is activated, enter the correct Access Code carefully twice,

pressing after every time.

If you enter the wrong code, the keypad will then be disabled for 10 minutes.

24 SECTION 4.6