User's Manual

28 SECTION 4.9 ~ 4.10
4.9 Shine Mode
Lockly Guard touchscreen keypad brightness was designed for optimum battery
life. However, some users may need to adjust the brightness to their convenience
to enter access codes.
Swipe your fingers across the keypad to light up to its normal
brightness. To adjust brightness, long press the top button
for 3 seconds.
The touchscreen keypad with automatically
return to normal brightness after the screen
dimmed.
To ensure Welcome Mode works
normally after replacing the battery,
reconnect the lock to the LocklyPro
app to synchronize the time.
NOTICE
4.10 Welcome Mode
Welcome Mode temporarily disables auto locking, keeping the
door open for a specified period of time eliminating the need to
enter access codes, fingerprint or using Mobile App.
Enable this feature through the LocklyPro App. Go to > Settings >
Enable Welcome Mode, then slide button to enable and set the
specific time you require your door unlocked.
The Welcome
Mode icon will remain displayed while in effect.