User's Manual

SECTION 3.3 9
3.3 Pairing to a New Mobile Device (Continued)
PAIR LOCKLY GUARD TO APP
To pair your smart lock to a new mobile phone, download the LocklyPro app on
your new mobile phone then use the same account to login to your LocklyPro
App on the new mobile device. If you're pairing your Lockly Guard to a new
LocklyPro app account, follow the steps below
1. On the old LocklyPro app account, go to Settings > Reset and pairing >Perform
Factory Reset.
2. Download, register and log in to the new LocklyPro app account.
3. You will need to scan the ACTIVATION CODE* that comes with the lock to setup
to a new account.
DO NOT INSERT ANY PINS TO RESET HOLES OF LOCKLY
GUARD DEFENDER OR LINK PLUS without consulting our
support team. If you cannot remove your Lockly Guard
from the old account, please contact LocklyPro support
[phone] or email: [e-mail]
IMPORTANT
1
2
Old LocklyPro
app account
Scan to new LocklyPro
app account
LOCKLYPRO.COM | HOTLINE: [phone] | EMAIL: [e-mail]
ACC20220328
KEEP THIS CARD!
ACTIVATION CARD
3
User Manual
LOCKLYPRO.COM | HOTLINE: [phone] | EMAIL: [e-mail]
ACC20220328
KEEP THIS CARD!
ACTIVATION CARD
TIP
Don’t lose the Activation Code Card.
Treat it like your Driver’s License as it’s the only thing you’ll have
to identify ownership of your lock. Please store this card in a safe
place as this is required to set up your Lockly Guard. The Activation
code will be required if you lose your smartphone or Access Code.
Without this code, you will not be able to reset your lock.
If you are missing the card, please contact us immediately.
ACTIVATION CODE CARD