User's Manual

16 SECTION 4.1
4.1 Unlocking with Access Codes
Lockly Guard Smart Lock can be unlocked using multiple ways - via your stored
Access Code, registered fingerprint, RFID Card, smartphone with Bluetooth, or the
physical key supplied with your lock.
Slide your hand across the screen to
activate the keypad.
Enter your 6 to 8 digit Access Code
followed by the . Press OK anytime
to reset if you entered the wrong digit.
If the Access Code entered is correct,
the door will unlock. If the Access Code
entered is incorrect, Lockly Guard will
beep twice.
Lock your Lockly Guard by pressing the OK Button anytime when the door is closed.
Lockly Guard will also auto-lock after five (5) seconds after unlocking and opening.
Automatic locking is only applicable to
Latch Lock Body. DeadBolt Lock Body,
Hook Bolt Lock Body and Exit Device Push
Bar do not support auto lock. You need to
manually turn the handle to lock.
You may toggle between two types of
keypad displays to enter your Access
Code. The fixed digit version and the PIN
Genie version (Recommended). Press and
hold the OK Button for 3 seconds to toggle
back and forth between the two keypads.
PIN Genie
Fixed Digit
Hold OK Button (3 sec)
Ten consecutive wrong attempts will put Lockly Guard in “Safe
Mode”. (See Section 4.5)
OK Button