User's Manual

You will see a “10” on the screen, notifying the number of minutes that the keypad is
disabled for. After 10 minutes, you may attempt to enter the correct Access Code
to
unlock the door. After the second incorrect attempt to unlock the lock with the
wrong Access Code, Lockly Guard will disable the keypad for 20 minutes, displaying
a
“20” on the screen. After the third wrong attempt to unlock the door with the
correct Access Code, the screen will be disabled for 30 minutes. (Example A and
Example B above).
Note: In order to conserve power, the countdown prompt will only be displayed for
3 seconds. You can reactivate the screen by sliding your hand across the screen.
4.5 Safe Mode
Countdown
Prompt (Displayed
in Minutes)
Will start with 10
and countdown
until 0.
Example
A
Example
B
Lockly Guard will enter Safe Mode when ten (10) consecutive wrong Access
Codes are entered within 5 minutes. When in Safe Mode, the lock status icon
will start to flash.
To disable Safe Mode, you must unlock the door using the correct fingerprint or
enter the correct Access Code twice in a row. Activate the keypad by pressing
and holding for 3 seconds.
Once the screen is activated, enter the correct Access Code carefully twice,
pressing after every time.
If you enter the wrong code, the keypad will then be disabled for 10 minutes.
20 SECTION 4.5