User's Manual

SECTION 3.1 7
3.1 Configuring Access
We recommend pairing your lock to your smart phone to
manage your access codes. Section 3.1 - 3.11 refers to locks
NOT paired with a smart phone. Once paired with a smart phone,
the Program button will be disabled.
How to Use the Keypad
There are a total of five (5) buttons on the keypad as
shown in the example image to the left. The
numbers in each button may differ than what is shown
on your device than what is displayed here.
To enter your required digit, just simply press the circle
where your number is shown. You do not
need to
press the actual number as anywhere within the circle
will suffice.
The button on the bottom is the OK button. You will be
pressing this button when you are done entering your
Access Code.
Your new Lockly Guard Access Code can be any combination of 6 to 8 digits. Once
a
new Access Code is entered, the Default Access Code of 123456 would be deleted.
Lockly Guard Defender can support up to 1033 sets of Access Codes. It comes with
60 access codes for free. To add more access codes, subscription to Lockly\OS is
required. To subscribe, send an email to [e-mail] or visit
www.locklyOS.com to learn more.
OK Button
The Default Access Code is 1 2 3 4 5 6
NOTICE