User's Manual

4.1 Locking/Unlocking with Access Codes

OK Button

Slide your hand across the screen to activate the

keypad.

Enter your 6 to 8 digit Access Code followed by the OK

button. Press OK anytime to reset if you entered the

wrong digit.

If the Access Code entered is correct, the door will

unlock. If the Access Code entered is incorrect, Lockly will

beep twice.

Three consecutive wrong attempts will put Lockly in “Safe Mode”. (See

Section 4.5)

Lock your Lockly by pressing the OK Button or by brushing your hand across the screen

anytime when the door is closed. The smart lock will also auto-lock after unlocking based on

your set auto-lock settings.

You may toggle between two types of keypad displays to

enter your Access Code. The fixed digit version and the

PIN Genie™ version (Recommended). Press and hold the

OK Button for 3 seconds to toggle back and forth

between the two keypads.

(Sample display shown only)

Hold OK (3 sec)

PIN Genie™

Fixed Digit

Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code, registered

fingerprint, smartphone with Bluetooth, the physical key supplied with your lock, or voice (Secure Pro

only or Secure Plus with Secure Link Wi-Fi Hub installed)

SECTION 4.1