User's Manual

SECTION 4.2

4.2 Locking/Unlocking Lockly with Fingerprints

Place a registered finger to the fingerprint scanner

located on the exterior side of the lock to the

right.

To register a fingerprint, please see Section 3.6.

If your fingerprint is registered and acknowledged,

you will hear a “beep” sound and a Green LED will

light up on the fingerprint scanner. You can then

push down the handle and open the door.

If you see a Red LED, it means your fingerprint is

not recognized. You must wait until the red LED is

off to try again.

For best fingerprint scanning practices, see

Section 3.7.

OK Button

Locking

Unlocking

To lock your smart lock, press the OK Button anytime

or brush your hand across the screen when the lock is

unlocked.