User's Manual

SECTION 2.4 5
2.4 Factory Reset
In order to restore the Lockly Secure to factory default settings, you must have your “Activation
Code” available. The Activation Code can be found on the Activation Card that came with your
smart lock.
After you have the Activation Code ready, push the reset button on the back panel of the Lockly
Secure to perform your reset. See below to see which Reset Process applies for you. Once the
smart lock has been reset, all the data previously stored will be deleted.
2.5 Keypad Display Switch
The exterior keypad screen can be locked and
turned off by using the ON/OFF switch at the
back panel (interior) of the smart lock. When it
is switched off, people who are outside cannot
enter any access codes to unlock the door.
Reset Button
If Paired with App If Never Paired
Press Reset Button
for one (1) second
Open the Lockly
smartphone app to
add your lock using
the Activation Code
Press Reset Button
for three (3) seconds