User's Manual

SECTION 3.2 11

3.2 Adding a Fingerprint (Continued)

OK Button

PASS will be displayed on the keyboard and automatically returns to number keypad. If you did not

successfully register your fingerprint, FAIL will show on the keypad. If FAIL is displayed, return to the

previous menu and rescan your finger.

Once you’re in Fingerprint Registration Mode you will see two numbers

displayed on keypad. The top number is your Fingerprint Registration

number, in this example to the left, “1”. The bottom number will always

start with a “6”.

You must successfully scan your fingerprint six (6) times for it to properly

will change, starting from 6 - then 5, 4, 3, 2, 1, until the fingerprint is

successfully registered.