User's Manual

SECTION 3.1 9

3.1 Configuring Access

The Default Access Code is

NOTICE

1 2 3 4 5 6

How to Use the Keypad

There are a total of five (5) buttons on the keypad as shown in the

example image to the left. The numbers in each button may differ

than what is shown on your device than what is displayed here.

To enter your required digit, just simply press the circle where your

umber is shown. You do not need to press the actual number as

anywhere within the circle will suffice.

The button on the bottom is the OK button. You will be pressing this

button when you are done entering your Access Code.

OK Button

We recommend pairing your lock to your smart phone to manage

your access codes. Section 3.1 - 3.9 refers to locks not paired with a

smart phone. Once paired with a smart phone, the Program button

will be disabled.

Your new Lockly Access Code can be any combination of 6 to 8 digits. Once a new Access Code

is entered, the Default Access Code of 123456 would be deleted. A maximum of 16 sets of Access

Codes can be stored for use at any given time. To add more than 16 sets of Access Codes, you must

delete an existing Access Code before adding a new code. If you're not using the APP, you can store

up to 18 sets of Access Code.