User's Manual

SECTION 2.4 5
2.4 Reset Button
In order to restore the Lockly to factory default settings, you must have your “Activation Code” available.
The Activation Code can be found on the Activation Code Card that came with your smart lock.
After you have the Activation Code ready, push the reset button on the back panel of the Lockly to
perform your reset. See below to see which Reset Process applies for you. Once the smart lock has
been reset, all the data previously stored will be deleted.
If Paired with App
If Never Paired
Press Reset Button for one (1) second or till you hear a short beep. Open the Lockly smartphone
app to add your lock using the Activation Code.
Press Reset Button until the lock reset.
Reset Button