User's Manual

SECTION 3.1 9
3.1 Configuring Access
The Default Access Code is
NOTICE
1 2 3 4 5 6
Your new Lockly Access Code can be any combination of 6 to 8 digits.
Once a new Access Code is entered, the Default Access Code of 123456 would be deleted.
A maximum of 16 sets of Access Codes can be stored for use at any given time.
To add more than 16 sets of Access Codes, you must delete an existing Access Code before adding
a new code. If you're not using the APP, you can store up to 18 sets of Access Code.
How to Use the Keypad
There are a total of five (5) buttons on the keypad as shown in the
example image to the left. The numbers in each button may
differ than what is shown on your device than what is displayed
here.
To enter your required digit, just simply press the circle where your
number is shown. You do not need to press the actual number as
anywhere within the circle will suffice.
The button on the bottom is the OK button. You will be pressing this
button when you are done entering your Access Code.
OK Button
We recommend pairing your lock to your smart phone to manage
your access codes. Section 3.1 - 3.9 refers to locks not paired with
a smart phone. Once paired with a smart phone, the Program
button will be disabled.