User's Manual

22 SECTION 3.9
3.9 Deleting Stored Fingerprints*
While in Programming Mode, select
“2DE” to delete a Fingerprint. If you
are not in Programming Mode,
please see Section 3.2 to enter
Programming Mode.
After pressing “2DE” to delete, press
“FP” to delete a fingerprint.
OK Button
Fingerprint ID Number
*Only works when lock is not paired with a smart phone device. If paired to a device
please delete your fingerprints from the administrative device paired to your lock.
Your registered fingerprint numbers
will be displayed on the screen. Tap
number to rotate to the next regis-
tered fingerprint. When you have
found the fingerprint ID you want to
delete, press and hold the OK button
for 3 seconds to delete. (Example
shown - “02”)
You will then see a confirmation
page displaying and with the
fingerprint number you are deleting
displayed in the lower left. Select Y to
delete or N to cancel.
Alternatively, while on Programming
Mode, select 2DE, then press FP
and place the registered fingerprint
you want to delete on the fingerprint
sensor.Your smart lock will identify the
fingerprint and jump to confirmation
page displaying Y and N. Select Y to
delete or N to cancel.