User's Manual

SECTION 3.10 23
3.10 Adding an RFID card
While in Programming Mode, select “1AD” to add an RFID card. If you are not in Programming Mode,
please see Section 3.2 to enter Programming Mode.
After pressing “1AD” press "Id" to add an RFID card.
RFID registration is only available of Lockly Secure RFID and Secure Pro models. RFID and Pro models.
Place the RFID card to the screen where the
RFID card sensor is embedded.
PASS will show on the keypad once
card is registered successfully.