User's Manual

SECTION 3.11

3.11 Deleting RFID Card

While in Programming Mode, select “2DE” to delete an RFID card. If you are not in Programming Mode,

please see Section 3.2 to enter Programming Mode.

After pressing “2DE” press “Id” to add an RFID card.

You will then see a confirmation page displaying

Y and N with RFID card number you are deleting

displayed in the lower left. Select Y to delete or N

to cancel.

Your registered RFID card will be displayed on the

screen. Tap the screen to show the next registered

RFID. When you have found the RFID card you want

to delete, press and hold the OK button for 3

seconds to delete.

OK Button

Fingerprint ID Number