User's Manual

4.1 Locking/Unlocking with Access Codes

OK Button

Slide your hand across the screen to activate

the keypad.

Enter your 6 to 8 digit Access Code followed

by the OK button. Press OK anytime to reset

if you entered the wrong digit.

If the Access Code entered is correct, the

door will unlock. If the Access Code entered is

incorrect, Lockly will beep twice.

Three consecutive wrong attempts will put Lockly in “Safe Mode”.

(See Section 4.5)

You may toggle between two types of keypad

displays to enter your Access Code. The fixed

digit version and the PIN Genie™ version (Rec-

ommended). Press and hold the OK Button for

3 seconds to toggle back and forth between

the two keypads.

(Sample display shown only)

Lock your Lockly by pressing the OK Button or by brushing your hand across the

screen anytime when the door is closed. The smart lock will also auto-lock after

unlocking based on your set auto-lock settings.

keypads.

Hold OK (3 sec)

PIN Genie™

Fixed Digit

Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code,

registered

fingerprint, smartphone with Bluetooth, the physical key supplied with your

lock, or voice (Secure Pro only or Secure Plus with Secure Link Wi-Fi Hub installed)

SECTION 4.1