User's Manual

13SECTION 3.4
3.4 Deleting an Access Code
While in Programming Mode,
select “2DE” to delete an
Access Code. If you are not in
Programming Mode, please see
Section 3.2 to enter Programming
Mode.
After pressing “2DE” press “Pd”
to delete an Access Code.
OK Button
Example Only
Active Access Codes will then be displayed on the screen in
sequence from left to right, top to bottom. In the example shown
on the left, the Access Code displayed is 1 3 5 7 9 0 .
Rotate through different Access Codes shown by touching any
number on the screen. If you find the Access Code you want to
delete, simply hold the OK button for 2 seconds. (Continue on
next page)