User's Manual

OK Button
Slide your hand across the screen to activate the
keypad.
Enter your 6 to 8 digit Access Code followed by the OK
button. Press OK anytime to reset if you entered the
wrong digit.
If the Access Code entered is correct, the door will
unlock. If the Access Code entered is incorrect, LOCKLY
will beep twice.
Three consecutive wrong attempts will put LOCKLY in “Safe Mode”.
(See Section 4.5)
Lock your LOCKLY by pressing the OK Button or by brushing your hand across the screen
anytime when the door is closed. The smart lock will also auto-lock after unlocking based on
your set auto-lock settings.
You may toggle between two types of keypad displays to
enter your Access Code. The fixed digit version and the
PIN Genie
®
version (Recommended). Press and hold the
OK Button for 3 seconds to toggle back and forth
between the two keypads.
(Sample display shown only)
Hold OK (3 sec)
PIN Genie
®
Fixed Digit
4.1 Locking/Unlocking with Access Codes
LOCKLY
®
Smart Lock can be unlocked using multiple ways - via your stored Access Code smartphone
with Bluetooth, the physical key supplied with your lock, or voice
with Secure Link Wi-Fi Hub
installed)
SECTION 4.1