User's Manual

SECTION 2.4 5
2.4 Reset Button
In order to restore the LOCKLY
®
to factory default settings, you must have your “Activation
Code” available. The Activation Code can be found on the Activation Code Card that came
with your smart lock.
After you have the Activation Code ready, push the reset button on the back panel of the LOCKLY
to perform your reset. See below to see which Reset Process applies for you. Once the
smart lock has been reset, all the data previously stored will be deleted.
Reset Button
If Never Paired
Press Reset Button for three (3) seconds
If Paired with App
Press Reset Button for one (1) second or till you hear a short beep. Open the LOCKLY smart-
phone app to add your lock using the Activation Code.