Installation Guide

STEP 6: INSTALLING THE LOCK (INTERIOR)
Interior
6.1
V
Insert Positioning Rods (V) into
the the holes to the left and
right of the Spindle (C).
The holes are located at the 3
o’clock and 9 o’clock positions.
6.2
Install the side with the black
Mounting Plate (LK)
plastic seal against the door.
Positioning rods slide through these holes.
Interior Mounting Plate (LK) will go
against the interior side of your door.
Remove the paper layer off of the
Adhesive Tape and align the
positioning rods on the bottom of
the plate to the corresponding left
and right holes.