Installation Guide

You should install the Secure Link Wi-Fi Hub after you have successfully finished installation and set
up of your Lockly Smart Lock. Refer to your appropriate Lockly Smart Lock Installation Guide and
User Manual that came with the lock for reference.
The Secure Link Wi-Fi Hub (Part A) can be plugged into any standard 5V 1A USB port or use the UL
certified USB AC adapter included in this box (recommended).
For best connectivity, the Secure Link Wi-Fi Hub must be installed within 10 feet of your Lockly
Smart Lock. You may experience delayed or intermittent connectivity if the Secure Link Wi-Fi Hub
is installed further than 10 feet away from the Lockly Smart Lock.
Lockly Smart Lock Secure Link Wi-Fi Hub
(Reference Image Only)
10 Feet
Distance Between
STEP 10: SETTING UP THE SECURE LINK WI-FI HUB
Make sure the Secure Link is installed in a location with a strong 2.4Ghz wireless signal. All modern
Wi-Fi devices support 2.4 GHz connections while some equipment supports both 2.4 GHz and 5
GHz. Please check with your network administrator or internet provider if you’re unsure what kind
of network you have.