Installation Guide

Plug the Secure Link Wi-Fi Hub into the 5V 1A USB AC adapter and plug the AC adapter to your wall
socket.
USA Outlet Shown
A red RED indicator light will flash slowly to
indicate that the Wi-Fi Hub is ready to connect.
LED Indicator is located next
to the Setup Button
Once you have confirmed that your Secure Link Wi-Fi Hub is ready to connect to your lock, open the
Lockly app to get started.
In case you have not downloaded our app, you can scan the QR
code to the left or visit https://lockly.com/app
Make sure you have already created an account and setup your Lockly device to the Lockly app to
continue.
Before you continue the Secure Link Wi-Fi Hub set up on your app, proceed to the next
page to learn
more about using the Secure Link Wi-Fi Hub and best practices for connectivity.