Installation Guide

When you are installing the Door Sensor, make sure the arrows on the Door Sensor is placed next
to the arrow from the Door Frame Sensor.
OR
When installed on your door, the distance between the Door Sensor and the Door Frame Sensor must
be less than 3/4” in order for the sensor to work.
Gap - less than 3/4” when installed.
When you are ready to install, pull the plastic tab at the
back of the Door Frame Sensor to activate the sensor.
Peel off the protective paper on the double sided tape
to expose the adhesive and apply securely to your door
and door frame.
NEXT >
Follow the On-Screen instructions on the app to test your
Door Sensor.