User's Manual

3.6 Adding a Fingerprint
SECTION 3.6
In this section, you will learn how to register a fingerprint to your new smart lock.
Fingerprint
registration is only available in the Lockly Secure Plus / Pro .
We are using an advanced biometric sensor, providing the most secure fingerprint
authentication.
For security reasons, Lockly will only accept fingerprint patterns that
consist of cross intersection points. Patterns with no cross intersection points will not be
acceptable.
Please check your fingers before registration to make sure the finger you want to register
will be acceptable by our system. Otherwise, use an alternative finger to ensure
successful registration.
The following examples show which types of fingerprint patterns will be acceptable. It is
highly recommended to enroll at least one finger from each hand in case the hand you
are using is unavailable, such as, in instances like if you are holding items in that hand or
have sustained an injury.
Your smart lock can register up to ninety-nine (99) fingerprints. Please read the
following sections if you want to add or delete fingerprints. We recommend using your
app to add fingerprints, however, the following section can show you how to add and
remove fingerprints if you did not pair your lock with a smart phone.
Fingerprint Pattern with Cross
Intersection Lines
Concentric or Parallel Pattern
with no Cross Intersection Lines
Fingerprint with Scars or Worn
Out Ridges
OK Not OK Not OK
16