User's Manual

2.4 Factory Reset

SECTION 2.4

In order to restore the Lockly to factory default settings, you must have your “Activation

Card” available. The Initial Code can be found on the Activation Card that came with

your smart lock.

After you have the Activation Card ready, push the reset button on the back panel of the

Lockly to perform your reset. See below to see which Reset Process applies for you. Once

the smart lock has been reset, all the data previously stored will be deleted.

2.5 Keypad Display Switch

The exterior keypad screen can be locked and

turned off by using the ON/OFF switch at the

back panel (interior) of the smart lock. When it

is switched off, people who are outside cannot

enter any access codes to unlock the door.

Reset Button

If Paired with App If Never Paired

Press Reset Button

for one (1) second

Open the Lockly

smartphone app to

add your lock using

the Activation Card

Press Reset Button

for three (3) seconds

OFF