User's Manual

4.1 Unlocking using Access Codes

Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code, registered

fingerprint, smartphone with Bluetooth, the physical key supplied with your lock, or voice (Secure

Pro only or Secure Plus with Secure Link Wi-Fi Hub installed)

OK Button

Three consecutive wrong attempts will put Lockly in “Safe Mode”. (See Section 4.7)

Slide your hand across the screen to activate the

keypad.

Enter your 6 to 8 digit Access Code followed by the

OK button. Press OK anytime to reset if you entered

the wrong digit.

If the Access Code entered is correct, the door will

unlock. If the Access Code entered is incorrect, Lockly

will flash red light.

Hold OK Button (3 sec)

You may toggle between two types of keypad displays to

enter your Access Code. The fixed digit version and the PIN

Genie

version (Recommended). Press and hold the OK Button

for 3 seconds to toggle back and forth between the two

keypads.(Sample display shown only)

PIN Genie

Fixed Digit

SECTION 4.1

Lock your Lockly by pressing the OK Button or by brushing your hand across the screen anytime when

the door is closed. The smart lock will also auto-lock after unlocking based on your set auto-lock

settings.