User's Manual

SECTION 4.9 ~ 4.1026
4.10 Welcome Mode
4.9 Shine Mode
Lockly touchscreen keypad brightness was designed for optimum battery life. However, some users
may need to adjust the brightness to their convenience to enter access codes.
Swipe your fingers across the keypad to light up to its normal brightness.
To adjust brightness, long press the upper left button for 3 seconds.
The touchscreen keypad with automatically return to normal brightness after the
screen dimmed.
Welcome Mode temporarily disables auto locking, keeping the
door open for a specified period of time eliminating the need to
enter access codes, fingerprint or using Mobile App.
Enable this feature through the Lockly App. Go to > Settings >
Enable Welcome Mode, then slide button to enable and set the
specific time you require your door unlocked. The Welcome Mode
icon will remain displayed while in effect.
NOTICE
To ensure Welcome Mode works normally after replacing the battery,
reconnect the lock to the Lockly app to synchronize the time.