User's Manual

2.4 Reset Button
SECTION 2.4 ~ 2.5
2.5 Keypad Display Switch
The exterior keypad screen can be locked and
turned off by using the ON/OFF switch at the back panel
(interior) of the smart lock. When it is switched off,
people who are outside cannot enter any access
codes to unlock the door.
If Never Paired
Press Reset Button
for three (3) seconds
5
Reset Button
OFF
ON
In order to restore the Lockly Secure to factory default settings, you must have your “Activation Code”
available. The Activation Code can be found on the Activation Code Card that came with your
smart lock.
After you have the Activation Code ready, push the reset button on the back panel of the Lockly
Secure to perform your reset. See below to see which Reset Process applies for you.
Once the smart
lock has been reset, all the data previously stored will be deleted.
Press Reset Button for
one (1) second or till
you hear a short beep
Open the Lockly
smartphone app to
add your lock using
the Activation Code