User's Manual

3.3 Adding an Access Code

SECTION 3.3

While in Programming Mode,

select “1AD” to add an

Access Code. If you are not

in Programming Mode,

please see Section 3.2 to

enter Programming Mode.

After pressing “1AD” press

“Pd” to add an Access Code.

Enter your new 6 - 8 digit Access Code and press

when you are finished. You will then re-enter the code to

confirm your new Access Code.

Remember, just touch the digit you need within the circle

around each 3 numbers. There is no need to touch the

exact location of the number. For example, based on the

example image to the left, if you need “1”, you can touch

the upper left button. For “6”, you would touch the upper

right button.