User's Manual

ManualsBrandsLOCKLY ManualsElectronicsElectronic Lock with BLE & Fingerprint

3.4 Deleting an Access Code (Continued)

SECTION 3.4

Once you have selected the Access Code you want

to delete, LOCKLY

®

will ask you to confirm deletion

by showing you the Access Code you are deleting,

in this example, 1 3 5 7 9 0.

Press to delete, or to cancel.

There are two incidents where your Access Code cannot be deleted.

NOTE

Only one Active Access CodeNo Access Codes Set

There are no Access Codes

set. The factory default Access

Code cannot be deleted.

There is only one (1) Access Code saved in

the smart lock. At least one code must be

registered. Please add another Access Code

before attempting to delete the existing

code.

14