User's Manual

2.4 Reset Button

SECTION 2.4

2.5 Keypad Display Switch

The exterior keypad screen can be locked and

turned off by using the ON/OFF switch at the

back panel (interior) of the smart lock. When it

is switched off, people who are outside cannot

enter any access codes to unlock the door.

Reset Button

If Never Paired

Press Reset Button

for three (3) seconds

OFF

In order to setup the LOCKLY

to another smart phone, you must have your “Activation

Code” available. The Activation Code can be found on the Activation Code Card

(PART U) that came with your smart lock.

After you have the Activation Code ready, push the reset button on the back panel of the

LOCKLY Secure to perform your reset. See below to see which Reset Process applies for

you. Once the smart lock has been reset, all the data previously stored will be deleted.

Press Reset Button for

one (1) second or till

you hear a short beep

Open the LOCKLY

smartphone app to

add your lock using

the Activation Code