Installation Guide

INSTALLING BATTERIES

Step 6

Once self-check completes ensure the lock operates smoothly by manually locking and

unlocking the door using the thumb turn on the interior assembly. The deadbolt should operate

smoothly without any interference or binding. If necessary, repeat step 2 and ensure that (a) the

deadbolt was extended and (b) the torque blade was inserted vertically while the deadbolt was

extended.

4: Swipe your hand across touchscreen. The lock should

close (lock). If the touchscreen is ON, touch , the

lock should lock as well. If deadbolt bounces back or

unlocks automatically it means something is not

installed correctly. Go back and repeat step 2, same

as above.

Once self-check is complete, install battery cover (I)

and secure with screw on top (do not over tighten).