R REV：0.1 ERP机型：PL35M1UQ-GL-SMT00010A-V2 ERP P/N： 描述: 说明书（智能锁体）:PL35M1UQ/PGD798NV,SMT000,REV.B(UMPGD798NV20220510), 196×196MM,封面&底面:128g双粉纸双面过哑油,双面印4C+2专,内页80g书纸,双面印单黑, 20页40面装订本,RoHS2.
Table of Contents Section 1 - Product Highlights 1.1 Product Features Section 5- Advanced Features 1 Section 2 - Product Overview 5.1 5.2 5.3 5.4 5.5 Video Doorbell Night Vision Loitering Alert Offline Access Code™ (OAC) Sub-Admin Access 2.1 Product Overview - Outside 3 2.2 Product Overview - Inside 4 2.3 Understanding Your New Lock 5 Section 6 - Re-keying 2.4 Keypad Display Switch 6 6.1 2.5 2.6 2.7 2.
1.1 Product Features Video Monitoring and Recording Full HD video camera streaming directly to your smartphone in real-time, gives a head to toe 130° view angle of who's at your front door. Video recordings are stored locally with no monthly fees. Night Vision IR & Enhanced Motion Detection All day and night, get notified with enhanced motion detection with what is happening outside up to 13 feet (4 meters) distance and clearly see images with an infrared night vision activated in the dark.
Offline Access CodeTM (OAC) The offline access code can allow owners to issue access codes, set the allowed access duration, all without Lockly ever connecting to the internet, so in case of power outage, you can still magically and remotely issue Access Codes without any connection to the web. Auto-Lock, Tamper Proof Keyhole and Backup Keys The door can be opened with physical backup keys. Receive notification whenever there's an attempt to tamper your lock. Worry no more about forgetting to lock the door.
2.1 Product Overview- Exterior Night Vision Motion Sensor Video Camera Microphone Bluetooth Icon OK Button Low Battery Alert Screen Lock Icon Video Doorbell Light Indicator Fingerprint Sensor Video Doorbell Button Key Hole Key Hole Cover Solar Panels Restart Pin Hole SECTION 2.
2.2 Product Overview - Inside USB Battery Screw Lithium Battery Program Button Reset Button Doorbell Display Keypad Switch Thumbturn Low Battery|Door Sensor LED 4 SECTION 2.
2.3 Understanding Your New Lock After the installation of your new Lockly Vision™ Elite, understanding some key functions of operating your smart lock is important. The next sections will walk you through configuring Access Codes, adding fingerprints, video doorbell recording, resetting, pairing, configuring your Offline Access Code™ (OAC) and other features of your lock. For any questions you can always visit http://Lockly.com/help for assistance.
2.4 Keypad Display Switch For your peace of mind, the exterior keypad screen can be locked and turned off by using the ON/OFF switch at the back panel (PART G) of the smart lock. When it is switched off, people who are outside cannot enter any access codes to unlock the door. OFF ON 2.5 Reset Button In order to setup the Lockly to another smart phone, you must have your “Activation Code” available. The Activation Code can be found on the Activation Code Card (PART V) that came with your smart lock.
2.6 Rebooting Your Lock NOTICE Reboot Lockly in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once after reboot. Only reboot when necessary. To reboot, find the reboot button located on the bottom of the exterior side of Lockly lock. The reboot button is located in the middle of the two 9V battery backup sockets.
2.7 Low Battery The built-in solar panel trickle charges with an ideal sunlight source and should prolong battery life. If sunlight is not enough and continues to fall below optimum level, battery icon on the touchscreen will light up to indicate low battery. Immediately replace with backup lithium battery to avoid smart lock from shutting down. To ensure the door lock continuous to work, follow below: • Remove the battery with insufficient power and replace it with a fully charged spare battery.
2.8 Enhanced Solar Charging Lockly Vision Elite is equipped with solar panels which auto trickle charges the lock's battery. Having an ideal sunlight source , the solar panel charges the battery to keep it at optimal charge level to around 50-80%. Keeping the battery at this optimal level prolongs battery life. Solar panel lasts up to 3-5years depending on usage and care.
3.1 Configuring Access Pair your lock to your smart phone to manage your access codes. Follow the on screen instructions to complete the setup. There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here. To enter your required digit, just simply press the circle where your number is shown.
3.2 Adding a Fingerprint NOTICE Please make sure your fingers are clean from dirt and oils before scanning your fingerprint. Make sure the sensor is also clean by taking a soft cloth and wiping the surface. We are using an advanced biometric sensor, providing the most secure fingerprint authentication. Your smart lock can register up to ninety-nine (99) fingerprints. Use the Lockly app to add fingerprints. Scan your finger by lightly placing your designated finger on the sensor until you hear a beep.
3.3 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract only metadata from fingers, even in poor conditions. Placing your finger on the sensor correctly helps consistency in fingerprint recognition. The following directions and tips will guide you on how to scan an optimal fingerprint image. Sensor Core Position your finger on the center of the sensor Top View OK Correct Incorrect Side View OK 12 SECTION 3.
3.4 Fingerprint Scanning Tips & Troubleshoot Tips for Fingerprint Enrollment and Recognition • Place your finger to completely cover the sensor with maximum contact surface. • Position the center of your finger (core) to the center of the sensor. • Hold your finger still for more than a second until you hear a beep. • Scan a finger that is clean and free from dirt. • Children ages 12 and under are not recommended to use fingerprint access due to the constant changes of their fingers during growth.
4.1 Unlocking with Access Codes Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code, registered fingerprint, smartphone with Bluetooth, the physical key supplied with your lock, or voice. Slide your hand across the screen to activate the keypad. Enter your 6 to 8 digit Access Code followed by the OK button. Press OK anytime to reset if you entered the wrong digit. OK Button If the Access Code entered is correct, the door will unlock.
4.2 Unlocking with Fingerprints Unlocking Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint, please see Section 3.2. If your fingerprint is registered and acknowledged, you will hear a “beep” sound and a Green LED will light up on the fingerprint scanner. You can then open the door. If you see a Red LED, it means your fingerprint is not recognized. You must wait until the red LED is off to try again.
4.3 Locking/Unlocking with Physical Key Exterior View We presumed you will not be using the key on a regular basis. To better protect you from malicious lock bumping, video will start recording whenever a key or bumping devices are used to unlock the door. To unlock your lock using the physical key (included), gently tilt and rotate the solar panel on either left or right direction to reveal the keyhole. Insert the key and turn clockwise to unlock the door. Again, this will trigger the video recording.
4.4 Locking/Unlocking with App You must have the Lockly iOS or AndroidTM app installed in order to lock and unlock with smartphone, connect with voice assistants like Alexa or Hey Google and to access video doorbell feature. Please download the app by visiting the link below or search “Lockly” from the correct app store. Scan or visit Lockly.com/app SECTION 4.
4.5 Locking/Unlocking with Voice Assistants Once your Lockly Vision™ Elite and Vision Connect has been installed and configured correctly, make sure you enable the Lockly Action on Google or the Amazon Alexa Skill before you can configure your voice to perform voice commands. You can ask your questions such as door status or request for your door to be locked or unlocked.
4.6 Safe Mode - Overview Lockly will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within 5 minutes. A 15 second video will be recorded once the lock entered into Safe Mode. When in Safe Mode, the lock status icon will start to flash. To disable Safe Mode, you must unlock the door using the correct fingerprint or enter the correct Access Code twice in a row. Activate the keypad by pressing and holding for 3 seconds.
4.6 Disabling Safe Mode There are four (4) ways to disable Safe Mode. Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3 seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 - Lockly Bluetooth App Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door.
4.7 Rain Mode Like other digital electronic products water can trigger to activate the touchscreen and fingerprint sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can setup your Lockly to enter Rain Mode to shut off keypad and fingerprint reader whenever rain or water is detected. Activate this feature on the Lockly app.
4.8 Shine Mode Lockly touchscreen keypad brightness was designed for optimum battery life. However, some users may need to adjust the brightness to their convenience to enter access codes. Swipe your fingers across the keypad to light up to its normal brightness. To adjust brightness, long press the upper left button for 3 seconds. The touchscreen keypad with automatically return to normal brightness after the screen dimmed. 4.
5.1 Video Doorbell Lockly Vision™ Elite has a built-in HD video doorbell with real-time video streaming on your smartphone and real-time 2-way voice interaction. Recordings are stored locally on the TF card, with no monthly fees, and you can access video recordings from anywhere using the Lockly app.
5.1 Video Doorbell When the doorbell is pressed, you will receive a notification through the Lockly app. Once you tap on the notification, app will automatically open to allow you to see who's at your door. Tap the Call icon to initiate conversation. Enhanced Alert Notification Lockly Vision™ Elite has an enhanced alert notification feature. When someone rings your doorbell and you were unable to answer, you will receive a 2nd alert notification.
5.1 Video Doorbell Live View You can open the Lockly App and tap on the camera to see what Vision sees at all times. Microphone Tap mic to mute or unmute. End Call Tap icon to hang up without opening the door. Unlock Tap icon to unlock door. TIP: Limit video interaction with guests to prolong battery life. SECTION 5.
5.1 Video Doorbell Video Recording Lockly Vision™ Elite stores video recording on the local TF card and recording can be accessed on the log history on your Lockly app.
5.2 Night Vision When video calls or video recordings are made, Vision Elite will automatically switch modes to either day or night vision according to the environment detected. This is the default settings of Vision Elite Night Vision feature. The settings can be changed in the Lockly app. Auto Mode: Vision Elite will automatically switch modes to day or night vision Day Mode: Night vision is always OFF Night Mode: Night vision is always ON IMPORTANT: SECTION 5.
5.3 Loitering Alert Vision Elite Motion Sensor with AI anti-false alert automatically records videos and pushes notification to smartphone when a moving object is detected. The Loitering Alert can be set ON or OFF on the Lockly app. Loitering Alert detection duration time and distance can also be adjusted on the app. IMPORTANT: 28 1. Loitering Alert by default is OFF. Please turn ON and set duration and distance in the Lockly app. Reset Loitering alert whenever factory resetting is restored. 2.
5.4 Offline Access CodeTM (OAC) The Offline Access CodeTM (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or AndroidTM first, and sync your smart lock to your mobile device. OAC can only be issued by the administrative owner of the lock. From there, you can then issue an Offline Access CodeTM within the app.
5.5 Sub-Admin Access Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your Lockly smart lock. The sub-admin permission can be setup through the Lockly App then write in bold. You can select the Validity Period and User Permissions of the sub-admin. Sub Admins will not be able to access the lock remotely but Sub Admin will be able to grant limited access codes to users when within Bluetooth range.
7.1 Important Notes Auto Lock Feature You can program the auto lock timing through the Lockly App. If auto-lock is not activated and door is still open, the touch-screen will remain lit, simply press the on the keypad to lock. One-Touch Locking You can always manually lock by touching anywhere on the touchscreen. Lockly smart lock is shipped with this feature already activated. You may deactivate this feature through the Lockly App.
8.1 Cleaning Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the DOs and DON’Ts below. DO • Rinse the touchscreen with warm water prior to cleaning. • Use the application of soap with a damp, lukewarm cloth. • Airdry or wipe dry with a soft microfiber cloth to avoid scratches. DON’T • Don’t use abrasives, high alkaline cleaners, or gasoline to clean your lock. • Don’t apply cleaning detergent directly in sunlight or at high temperatures.
9.1 Safety Precautions Please read all instructions carefully. Remind all Lockly users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. Do not use any inappropriate tools that can cause damages or malfunction to your lock. Always make sure your door is securely closed and locked when you leave your house to prevent unwanted entry.
FCC Warning： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
封底 VISION ELITE ™ We’re here to help! help@Lockly.com https://Lockly.com/help To ensure you have access to the most updated and newly added features of your Lockly smart lock, please visit: www.Lockly.com/newfeatures For digital versions and instructional videos, please visit the following link: http://Lockly.com/help © Copyright 2022 Lockly All rights reserved USA Patent No. US 9,881,146 B2 | USA Patent No. US 9,853,815 B2 | USA Patent No. US 9,875,350 B2 | USA Patent No.
