User's Manual

2.7 Low Battery
The built-in solar panel trickle charges with an ideal sunlight source and should prolong battery
life. If sunlight is not enough and continues to fall below optimum level, battery icon on the
touchscreen will light up to indicate low battery. Immediately replace with backup lithium
battery to avoid smart lock from shutting down. To ensure the door lock continuous to work,
follow below:
• Remove the battery with insufficient power and replace it with a fully charged spare battery.
• Use the power adapter or power bank to connect the battery through the USB cable to
charge.
IMPORTANT: When the battery is lower than 20%, the motion sensing recording function will be
disabled, and the video doorbell function will be disabled when the battery is lower than 5%.
You can check the real-time battery level of the door lock through the Lockly App.
When there is no display, sound and screen is non-functional, replace batteries immediately.
Use supplied physical backup keys to unlock the door. Alternatively, use a 9V battery as shown
below to temporarily activate the lock.
Your Lockly will automatically detect battery
polarity. So hold your 9V battery lead in place
against bottom of the Lockly to temporarily
activate t he screen to enter your Access Code.
Be sure to hold the 9V battery against the contact
points located at the bottom of the lock until you
have successfully unlocked your door with your
Access Code. Once unlocked, batteries should
be replaced immediately.
9V Battery
-
+
SECTION 2.78