Installation Guide

In order for your Secure Link Wi-Fi Hub to connect to the internet, you must have a
Wi-Fi network with a radio signal emitting 2.4 GHz. All modern Wi-Fi devices support
2.4 GHz connections while some equipment supports both 2.4 GHz and 5 GHz.
Please check with your network administrator or internet provider if you’re unsure
what kind of network you have.
You should install the Secure Link Wi-Fi Hub after you have successfully finished
installation and set up of your Lockly Smart Lock. Refer to your appropriate
Lockly Smart Lock Installation Guide and User Manual that came with the lock for
reference.
The Secure Link Wi-Fi Hub (Part A) can be plugged into any standard 5V 1A USB
port or use the UL certified USB AC adapter included in this box (recommended).
For best connectivity, the Secure Link Wi-Fi Hub must be installed within 10 feet of
your Lockly Smart Lock. You may experience delayed or intermittent connectivity
if the Secure Link Wi-Fi Hub is installed further than 10 feet away from the Lockly
Smart Lock.
Lockly Smart Lock
Secure Link Wi-Fi Hub
(
Reference Image Only)
10 Feet
Distance Between
STEP 11: SETTING UP THE SECURE LINK WI-FI HUB