Installation Guide

G(2X)
E
Before screwing check the vertical
alignment for the mounting plate
and exterior assembly.
STEP 5 (CON’TD): INSTALLING THE EXTERIOR ASSEMBLY
After installation of the exterior assembly, use the physical key and try to unlock/lock
to check if the deadbolt is moving and not stuck. Do not forget to take out the key
before proceeding to next steps.
* E is only required if you drilled a hole in your door. If you did not drill a hole in your
door, please do not insert E.
Depending on your door thickness, use E1 or E2 screws for the doors.
Doors with thickness of 35-43mm, use E1. Doors with thickness of 43-50mm, use E2.
*
G(2X)
E
E1
E2