Installation Guide

INSTALLING INTERIOR ASSEMBLY (F)

Step 3

TIP: when installing screws by hand, turn screws clockwise several turns then

counterclockwise one turn to ensure smooth threading and no cross threading.

1: Check mounting plate

alignment to door hole before

securing with adhesive strips.

3: Insert, tighten by hand 2

screws located on the left and

right of the blade. Check

alignment and tighten with

screwdriver until mounting plate

is securely placed on door.

4: Use the key to ensure deadbolt

locks and unlocks smoothly (no

binding or rubbing). IMPORTANT:

when finished, leave the deadbolt

extended and remove the key

before proceeding to the next step.

2: Align and secure mounting plate

with adhesive strips. Guide con-

nection cable through and secure

to the lower left notched hole.

Remove key when finished

Leave deadbolt extended