User's Manual

SECTION 2.78
When your smart lock low-battery warning alert finally dies, you will have 3
chances to unlock your smart lock either by a password, APP or fingerprint.
If the unlock was successful, the low-battery warning alert will be on for 1
minute. After which, the smart lock will go to dead-battery mode and will
lock auto lock in 5 seconds and the screen will display a low-battery icon.
Dead Battery
Condition Indicator Solution
Low Battery
Battery Icon on the
display keypad will
light up to indicate
low battery.
Replace batteries immedi-
ately to avoid battery
failure. Lockly Secure can
still operate up to 300 cycles
in low battery condition.
When there is no
display and sounds;
and screen is
non-functional.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the
door. Alternatively, use a 9V
battery as shown below to
temporarily activate the lock.
Your Lockly will automatically
detect
battery polarity. So hold your 9V
battery lead in place against
bottom of the Lockly to temporarily
activate
t he screen to enter your
Access Code. Be sure to hold the 9V
battery against the contact points
located at the bottom
of the lock
until you have successfully
unlocked
your door with your Access
Code.
Once unlocked, batteries should be
replaced immediately.
When the battery is in seriously low condition, Lockly will make continuous
beeping sounds in addition to the flashing low battery icon on the touch
screen. You should replace batteries immediately to avoid your smart lock
from shutting down.
2.7 Low Battery
_
+
9V
Alkaline
battery