User's Manual

SECTION 3.2 11
To enter Programming Mode, remove the
battery compartment cover on the interior
side of the Secure to expose the Reset
and Program buttons.
Simply press the Program button to enter
programming mode.
Note: Program button will be disabled
once synced to a smart phone. Configure
all settings via synced smart phone.
Access Codes previously added by
Programming mode will be cleared.
3.2 Entering Programming Mode
To end Programming Mode, press the Program button anytime.
Programming Mode will automatically exit if the keypad is inactive for
more than thirty (30) seconds.
After entering Programming Mode, you
should see the screen as displayed to
the right on your Lockly keypad. Follow
the following steps to add, delete, or
check your Access Codes.
Program Button
Add Passcode
ModeNumber
Delete Passcode
View Passcode