User's Manual

SECTION 3.3

3.3 Adding an Access Code

While in Programming Mode, select “1AD” to add an Access Code. If

you are not in Programming Mode, please see Section 3.2 to enter

Programming Mode.

After pressing “1AD” press “Pd” to add an Access Code.

Enter your new 6 - 8 digit Access Code

and press when you are finished.

You will then re-enter the code to confirm

your new Access Code.

Remember, just touch the digit you need

within the circle around each 3 numbers.

There is no need to touch the exact

location of the number. For example,

based on the example image to the left, if

you need “1”, you can touch the upper

left button . For “6”, you would touch the

upper right button.