User's Manual

SECTION 3.414
3.4 Deleting an Access Code
While in Programming Mode, select “2DE” to delete an Access Code. If you
are not in Programming Mode, please see Section 3.2 to enter Programming
Mode.
After pressing “2DE” press “Pd” to delete an Access Code.
OK Button
Example Only
Active Access Codes will then be
displayed on the screen in sequence
from left to right, top to bottom. In the
example shown on the left, the Access
Code displayed is 1 3 5 7 9 0 .
Rotate through different Access Codes
shown by touching any number on the
screen. If you find the Access Code
you want to delete, simply hold the OK
button for 3 seconds. (Continue on
next page)