User's Manual

SECTION 3.516
3.5 Checking the Access Codes
While in Programming Mode, select “3CH” to check registered Access
Codes. If you are not in Programming Mode, please see Section 3.2 to
enter Programming Mode.
Active Access Codes will then be displayed on the screen in sequence
from left to right, top to bottom. In the example shown on the left, the
Access Code displayed is 1 3 5 7 9 0 .
OK Button
Rotate through the different Access Codes by touching any number on the
screen.
To exit Check Access Code screen, simply press the OK button.
If there are no Access Codes registered
in your smart lock, Check Access Code
mode will be invalid. The default
Access Code will not be shown on the
display keypad, and you will see the
following screen shown to the left
instead.