User's Manual

SECTION 4.328
Place a registered finger to the
fingerprint scanner located on
the exterior handle of the lock.
To register a fingerprint, please
see Section 3.6.
If your fingerprint is registered and
acknowledged, you will hear a
“beep” sound and a Green LED
will light up on the fingerprint
scanner. You can then push
down the handle and open the
door.
If you see a Red LED, it means
your fingerprint is not recognized.
You must wait until the red LED is
off to try again.
For best fingerprint scanning
practices, see Section 3.7.
4.2 Locking/Unlocking Lockly with Fingerprints
To lock the Lockly, press the OK
Button anytime when the door is
opened.
OK Button
Locking
Unlocking