User's Manual

You will see a “10” on the screen, notifying the number of minutes that the
keypad is disabled for. After 10 minutes, you may attempt to enter the
correct Access Code to unlock the door. After the second incorrect
attempt to unlock the lock with the wrong Access Code, Lockly will disable
the keypad for 20 minutes, displaying a “20” on the screen. After the third
wrong attempt to unlock the door with the correct Access Code, the
screen will be disabled for 30 minutes. (Example A and Example B above).
Note: In order to conserve power, the countdown prompt will only be
displayed for 3 seconds. You can reactivate the screen by sliding your
hand across the screen.
SECTION 4.732
4.7 Safe Mode
Lockly will enter Safe Mode when three (3) consecutive wrong Access
Codes are entered within 5 minutes. When in Safe Mode, the lock status
icon will start to flash.
To disable Safe Mode, you must unlock the door using the correct fingerprint
or enter the correct Access Code twice in a row. Activate the keypad
by pressing and holding for 3 seconds.
Once the screen is activated, enter the correct Access Code carefully
twice, pressing after every time.
If you enter the wrong code, the keypad will then be disabled for 10
minutes.
Countdown
Prompt
(Displayed in
Minutes)
Will start with 10
and countdown
until 0.
Example A Example B