User's Manual

Auto Lock Feature
Your lock can be programmed to auto-lock between 5-300 seconds
after the door opening. You can select the timing through the Lockly
App. If auto-lock is not activated and door is still open, the touchscreen
will remain lighted, simply press the on the keypad to lock.
One-Touch Locking
You can always manually do a quick lock by touching anywhere on the
touchscreen. Lockly smart lock is shipped with this feature already activated.
You may deactivate this feature through the Lockly App.
9V Backup Access
When your Lockly is out of power, you can temporarily activate the
keypad by using a 9V battery against the bottom of the exterior side of the
smart lock. Please see Section 2.9 for more info.
Physical Keys
Even though you have your fingerprints registered, RFID cards and Access
Codes stored, it’s always best practice to carry your physical keys with you
at all times in case for any reason, Lockly falls into Safe Mode.
Initial Code
You may find an Initial Code Card with an Initial Code included in your
package. It is very crucial that you do not lose this card. Please store this
card safely as you will need the default Initial Code on that card to master
reset your lock in case, for any reason, you have lost the phone paired to
Lockly and also forgot your Access Code.
Troubleshooting
Please visit http://lockly.com/help for troubleshooting and the most
frequently asked questions and answers.
SECTION 6.1 37
6.1 Important Notes