User's Manual

SECTION 2.46
Reset Button
2.4 Factory Reset
In order to restore the Lockly to factory default settings, you must have your
“Initial
Code” available. The Initial Code can be found on the Initical
Code Card that came with your smart lock. (See Quick Start Guide)
After you have the Initial Code ready, push the reset button on the back
panel of the Lockly to perform your reset. See below to see which Reset
Process applies for you. Once the smart lock has been reset, all the data
previously stored will be deleted.
2.5 Keypad Display Switch
The exterior keypad screen can be locked and turned off using the
ON/OFF switch at the back panel of the smart lock. When it is switched
off, people outside cannot enter any passcode to unlock the door.
Keypad
Keypad screen
OFF
ON