User's Manual

STEP 3. INSTALLING THE EXTERIOR ASSEMBLY (B)
3.1: Check the Exterior Assembly
alignment to your door hole and
deadbolt, before you peel off
the cover of the adhesive strip.
3.3: Place the exterior assembly on the door by inserting the torque blade on a vertical
position to the deadbolt slit hole and guide the cable under the deadbolt. Secure with the
adhesive strips.
3.2: Before placing the exterior assembly on the
door, make sure the torque blade is in vertical
position and the deadbolt is extended.
EXTERIOR VIEW
(1)
Vertical
When installing the exterior assembly,
make sure the deadbolt is fully
extended and the slit hole is vertically
positioned on the bottom, the torque
blade should be inserted in a vertical
position.