Installation Guide

When you are installing the Door Sensor, make sure the arrows
on the Door Sensor is placed next to the arrow from the Door
Frame Sensor.
OR
When installed on your door, the distance between the Door
Sensor and the Door Frame Sensor must be less than 3/4” in
order for the sensor to work.
Gap - less than 3/4” when installed.
When you are ready to install, pull
the plastic tab at the back of the
Door Frame Sensor to activate the
sensor.
Peel off the protective paper on
the double sided tape to expose
the adhesive and apply securely
to your door and door frame.
NEXT >
Follow the On-Screen instructions
on the app to test your Door
Sensor.